BMW EWS2 IMMO EMULATOR

Reference: 5774

SIMOS8.xx MODULE FOR VAG IMMO WFS4 / WFS5 CALCULATOR

SIMOS8.x ECUS MODULE: This module allow to transfer immo data from one ecu to other by dumps, need the processor ID or full dump from flash processor and eeprom. This module not work alone, need the basic license with usb dongle.

Reference: EMU2838

NISSAN NATS5 K-LINE IMMO EMULATOR

ONLY FOR PROFESSIONAL USERS, NOT SUPPORT AND NOT CONNECTION SCHEMES IMMO EMULATOR FOR NATS5 NISSAN IMMO SYSTEM, WORKS WITH ALL VEHICLES AND ECUS THAT USE NATS5 IMMOBILIZER SYSTEM. Tested in: BOSCH EDC15M+ HITACHI MEC20 HITACHI MEC33 (ONLY WITH NATS5 SYSTEM, THERE ARE WITH NATS6 TOO) ZEXEL TERRANO II (ONLY WITH NATS5 SYSTEM, THERE ARE WITH NATS4 TOO)...

Reference: 5777

MED9.1.x CRYPTO MODULE FOR VAG IMMO WFS4 / WFS5 CALCULATOR

MED9.1.x MODULE: This module allow to transfer immo data Bosch MED9.1.x Crypto Ecus by dumps. This module not work alone, need the basic license with usb dongle.

Reference: EMU4116

T200 DAEWOO / CHEVROLET K-LINE IMMO EMULATOR (DAEWOO 2)

ONLY FOR PROFESSIONALS, PLUG & PLAY EMULATOR. Emulator for disable immobilizer T200 type with immo box IM700 / IM710 / IM720 / IM730 / IM800 / IM850 / IM860 / IM861 / 96456677 and similar (Megamos48 and Tiris Transponders) in DAEWOO y CHEVROLET vehicles from 2000 year and up. COMPATIBILITY:      - SIEMENS / KEMSCO ECUS D3 (SIRIUS TYPE WITH BLACK...

Reference: 6306

TCU MODULE FOR VAG IMMO WFS4 / WFS5 CALCULATOR

TCU MODULE: This module allow edit, export and import immobilizer data in gear box TCU (DQ200MQB, DQ250MQB, VL300, VL381, DL382, DL501, DQ200MQB Gen2, DQ500, DQ381) modules (for DL382 not possible transfer immo data 1:1). Remember that need full flash and eeprom files. This module not work alone, need the basic license with usb dongle.

Reference: EMU6851

HONDA HIS-5 / MLBHIS-5 K-LINE IMMO EMULATOR

IMMO EMULATOR: BRAND: ECUSERWIS BUS: DEDICATED IMMO K-LINE EMULATOR SYSTEM: HIS-5 / MLBHIS-5 / HIS5 / MLBHIS5 (BASED IN MEGAMOS 48) INSTALLATION: PLUG & PLAY, NO NEED MODIFY ANY MEMORY IN THE ECU. IS POSSIBLE INSTALL INSIDE THE ECU OR IN THE IMMO BOX PLUG. IS NECESSARY UNPLUG THE ORIGNAL IMMO BOX OR CUT IMMO LINE WIRE STATUS: NEW

Reference: EMU5981

UNICAN IMMO EMULATOR 50 / 125 / 250 / 500 KBPS (NOT SUPPORT INCLUDED)

ONLY FOR PROFESSIONAL USERS, NOT SUPPORT AND NOT CONNECTION SCHEMES EMULADOR UNICAN: BRAND: ECUSERWIS MODEL: UNICAN PROGRAMS: RENAULT/DACIA - CAN 250/500 Kbps PSA (CITROEN/PEUGEOT) - CAN 250/500 Kbps VAG WFS3 - CAN 500 Kbps VAG WFS4 - CAN 500 Kbps VAG WFS5 - CAN 500 Kbps (ECU + TCU) FIAT/IVECO/ALFA ROMEO/LANCIA - CAN 50/250/500 Kbps NISSAN NATS 6/7 - CAN...

Reference: EMU2836

RENAULT / DACIA K-LINE IMMO EMULATOR

ONLY FOR PROFESSIONAL USERS, NOT SUPPORT AND NOT CONNECTION SCHEMES IMMO EMULATOR FOR RENAULT AND DACIA ECUS WITH K-LINE DEDICATED IMMOBILIZER LINE: Tested in next Ecus families: BOSCH EDC15C3 BOSCH EDC15VM+ BOSCH MS6.3 BOSCH MSA15 DELPHI DDCR DELPHI DCM1.2 SIEMENS EMS3132 SIEMENS SIM32 SIEMENS SIRIUS 32 SIEMENS SIRIUS 32N LUCAS DCU3R IMPORTANT: For...

Reference: EMU4546

DAEWOO 1 KLINE IMMO EMULATOR

Reference: 6237

Brand: BOSCH

ENGINE ECU BOSCH EDC1.3.1 MSA11 0281001272 RANGE ROVER 2245332

ENGINE ECU: BRAND: BOSCH     BOSCH FAMILY: EDC1.3.1 / EDC 1.3.1 (MSA 11) BOSCH REFERENCE: 0281001272 / 0 281 001 272 FROM: LAND ROVER RANGE ROVER 2.5 TURBODIESEL 136HP LAND ROVER REFERENCE: 2245332 OTHERS REFERENCES: 28RTD923 / TYPE 4069 STATUS: USED / NEVER REPAIRED

Reference: 6188

SIMOS 10/11/12/18 MODULE FOR VAG IMMO WFS4 / WFS5 CALCULATOR

SIMOS1x.x MODULE: For proper work module just need non encrypted full readout from ECU flash + eeprom , and also the ECU cannot use SHE (Secure Extension Hardware), allowed is copy immo data beetwen ECU and change power class, import immodata from BCM2 and other immo block, export to WFS5 immoemulator is allowed. This module not work alone, need the basic...

Reference: 6288

ELV MQB MODULE (ONLY WITH NEC V850) FOR VAG IMMO WFS4 / WFS5 CALCULATOR

MQB MODULE: This module allow edit, export and import immobilizer data in steering lock (ELV/ESL) MQB. Remember that only works with NEC V850 MCU files. This module not work alone, need the basic license with usb dongle.

Reference: 2494

I/O TERMINAL SIEMENS SOFTWARE LICENSE (BASIC V2)

Reference: 6484

DCM6.2V / DCM3.7 MODULE FOR VAG IMMO WFS4 / WFS5 CALCULATOR

DELPHI DCM6.2V / DCM3.7ECUS MODULE: For work properly this module just need non encrypted full readout from ECU flash, allowed is copy immo data beetwen ECU and change power class, import immodata from BCM2 and other immo block, export to WFS5 immo emulator is allowed. This module not work alone, need the basic license with usb dongle.

Reference: 2491

I/O TERMINAL BOSCH SOFTWARE LICENSE

Reference: EMU4167

BMW / MINI ELV EMULATOR